Skip to Content
Merck
  • Development and application of a non-targeted extraction method for the analysis of migrating compounds from plastic baby bottles by GC-MS.

Development and application of a non-targeted extraction method for the analysis of migrating compounds from plastic baby bottles by GC-MS.

Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment (2014-11-20)
Matthias Onghena, Els van Hoeck, Philippe Vervliet, Marie Louise Scippo, Coraline Simon, Joris van Loco, Adrian Covaci
ABSTRACT

In 2011, the European Union prohibited the production of polycarbonate (PC) baby bottles due to the toxic effects of the PC monomer bisphenol-A. Therefore, baby bottles made of alternative materials, e.g. polypropylene (PP) or polyethersulphone (PES), are currently marketed. The principal aim of the study was the identification of major compounds migrating from baby bottles using a liquid-liquid extraction followed by GC/MS analysis. A 50% EtOH in water solution was selected as a simulant for milk. After sterilisation of the bottle, three migration experiments were performed during 2 h at 70°C. A non-targeted liquid-liquid extraction with ethyl acetate-n-hexane (1:1) was performed on the simulant samples. Identification of migrants from 24 baby bottles was done using commercially available WILEY and NIST mass spectra libraries. Differences in the migrating compounds and their intensities were observed between the different types of plastics, but also between the same polymer from a different producer. Differences in the migration patterns were perceived as well between the sterilisation and the migrations and within the different migrations. Silicone, Tritan™ and PP exhibited a wide variety of migrating compounds, whereas PES and polyamide (PA) showed a lower amount of migrants, though sometimes in relatively large concentrations (azacyclotridecan-2-one up to 250 µg kg⁻¹). Alkanes (especially in PP bottles), phthalates (dibutylphthalate in one PP bottle (±40 µg kg⁻¹) and one silicone bottle (±25 µg kg⁻¹); diisobutylphthalate in one PP (±10 µg kg⁻¹), silicone (up to ±80 µg kg⁻¹); and Tritan™ bottle (±30 µg kg⁻¹)), antioxidants (Irgafos 168, degradation products of Irganox 1010 and Irganox 1076), etc. were detected for PP, silicone and Tritan™ bottles. Although the concentrations were relatively low, some compounds not authorised by European Union Regulation No. 10/2011, such as 2,4-di-tert-butylphenol (10-100 µg kg⁻¹) or 2-butoxyethyl acetate (about 300 µg kg⁻¹) were detected. Migrating chemicals were identified as confirmed (using a standard) or as tentative (further confirmation required).

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Anethol, natural, 99%, FG
SKU
Pack Size
Availability
Price
Quantity
Stearic acid, European Pharmacopoeia (EP) Reference Standard
SKU
Pack Size
Availability
Price
Quantity
Benzophenone, European Pharmacopoeia (EP) Reference Standard
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Ethyl acetate, ReagentPlus®, ≥99.8%
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
4-Propylbenzaldehyde, 95%
SKU
Pack Size
Availability
Price
Quantity
Supelco
1,8-Cineole, primary reference standard
SKU
Pack Size
Availability
Price
Quantity
Supelco
Benzophenone, analytical standard
SKU
Pack Size
Availability
Price
Quantity
Millipore
Ethyl acetate, suitable for HPLC, ≥99.8% (GC)
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Ethyl acetate, anhydrous, 99.8%
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Ethanol
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Stearic acid, Grade I, ≥98.5% (capillary GC)
SKU
Pack Size
Availability
Price
Quantity
Supelco
Methyl laurate, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
SKU
Pack Size
Availability
Price
Quantity
Supelco
Melting point standard 79-81°C, analytical standard
SKU
Pack Size
Availability
Price
Quantity
Supelco
Dichloromethane solution, contains 10 % (v/v) methanol
SKU
Pack Size
Availability
Price
Quantity
Supelco
5α-Androstan-17β-ol-3-one, VETRANAL®, analytical standard
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Hexane, suitable for HPLC, ≥95%
SKU
Pack Size
Availability
Price
Quantity
Supelco
Hexane, analytical standard
SKU
Pack Size
Availability
Price
Quantity
Millipore
Bifido Selective Supplement B, suitable for microbiology
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Benzophenone, purified by sublimation, ≥99%
SKU
Pack Size
Availability
Price
Quantity
Supelco
Ethanol, standard for GC
SKU
Pack Size
Availability
Price
Quantity
Supelco
Ethyl acetate, analytical standard
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Methyl laurate, ≥98%, FG
SKU
Pack Size
Availability
Price
Quantity
Supelco
Methyl dodecanoate, analytical standard
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Methyl laurate, 99.5%
SKU
Pack Size
Availability
Price
Quantity
Supelco
Methylene Chloride, Pharmaceutical Secondary Standard; Certified Reference Material
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
2,4-Di-tert-butylphenol, 99%
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
2,2,4-Trimethyl-1,3-pentanediol diisobutyrate, ≥98.5%
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Hexane, HPLC Plus, for HPLC, GC, and residue analysis, ≥95%
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Hexane, Laboratory Reagent, ≥95%
SKU
Pack Size
Availability
Price
Quantity
Sigma-Aldrich
Hexane, ReagentPlus®, ≥99%
SKU
Pack Size
Availability
Price
Quantity