649813

PEDOT

tetramethacrylate end-capped solution, 0.5 wt. % (dispersion in propylene carbonate), contains p-toluenesulfonate as dopant

• 동의어(들): Oligotron^™ PC, PEDOT, PEDOT, tetramethacrylate end-capped
• CAS Number: 126213-51-2
• EC Number: 203-572-1
• MDL number: MFCD06798809
• UNSPSC 코드: 12352103
• NACRES: NA.23

속성

• Product Name: Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution, 0.5 wt. % (dispersion in propylene carbonate), contains p-toluenesulfonate as dopant
• 분자량: ~1,360-1,600 g/mol (methacrylate equivalent weight); average M_n ~6,000(lit.)
• Quality Level: 100
• 포함: p-toluenesulfonate as dopant
• 구성: Oligotron^™ tetramethacrylate, 0.5 wt. % ; propylene carbonate, 99.5 wt. %
• 농도: 0.5 wt. % (dispersion in propylene carbonate)
• 저항성: 1-10 M Ω/sq (typical surface resistance of film)
• 전도도: 0.1-0.5 S/cm (bulk)
• density: 1.189 g/mL at 25 °C

설명

일반 설명

Please follow this link for Aedotron/Oligotron selection guide table.

Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution (PEDOT-Meth) is a semiconductor based polymer that is functionalized with tetramethacrylate that facilitates effective crosslinking of the conjugated films.

The main characteristic of Oligotron^™ PC is that it behaves as a reactive oligomer in non-volatile solvent. Used blended with monomers, or for reactions with functional compounds.

애플리케이션

For best results, agitate for 20 minutes prior to use. Films cast from propylene carbonate will require heat to dry. Photocurable inks can be formulated by adding acrylate monomers and photoinitiators (i.e. DMPA). Propylene carbonate will remain in the polymer. Functional compounds can be coupled to the oligomer via reactions at the methacrylate group.

PEDOT-Meth can be used as a plasticizing membrane in the fabrication of ion-selective sensors and light emitting diodes.

Product can be blended with additional acrylate or methacrylate monomers and crosslinked to make polymer blends. Custom molecules can be synthesized by bonding functional compounds, via the methacrylate groups, to the conducting EDOT oligomers.

특징 및 장점

End-capped structure renders the conducting oligomer PEDOT dispersible. The methacrylate groups offer the potential for crosslinking, or addtional chemical functionalization. Completely dried Oligotron(TM) tetramethacrylate via the methacrylate functional groups.

주의사항

Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.

법적 정보

Oligotron is a trademark of TDA Research, Inc.

안전성 정보

• 픽토그램: GHS07
• 신호어: Warning
• 유해 및 위험 성명서: H319
• 예방조치 성명서: P305 + P351 + P338
• Hazard Classifications: Eye Irrit. 2
• Storage Class Code: 10 - Combustible liquids
• WGK: WGK 2
• Flash Point (°F): 269.6 °F - closed cup
• Flash Point (°C): 132 °C - closed cup