Skip to Content
MilliporeSigma
  • Quantitative analysis for organic acids in biological samples: batch isolation followed by gas chromatographic-mass spectrometric analysis.

Quantitative analysis for organic acids in biological samples: batch isolation followed by gas chromatographic-mass spectrometric analysis.

Clinical chemistry (1989-04-01)
G Hoffmann, S Aramaki, E Blum-Hoffmann, W L Nyhan, L Sweetman
ABSTRACT

This new method for qualitative and quantitative determination of organic acids, aldehydes, and ketones in biological samples is effective for use with urine, plasma, and amniotic fluid, and it requires no deproteinization. Isolation by batch-wise liquid partition chromatography on silicic acid follows formation of the O-(2,3,4,5,6-pentafluorobenzyl)oximes of oxoacids, aldehydes, and ketones. The total organic acid content of the sample provides a rapid screening test for metabolic abnormality. A wide-bore, bonded-phase capillary column was used for quantitative gas chromatographic-mass spectrometric analysis, followed by automated identification and quantification. Analytical recoveries were quantitative for a wide variety of metabolites. Gas-chromatographic retention indices, discriminating ions, and control ranges in amniotic fluid, plasma, and urine of adult subjects were determined for 61 biologically important compounds.

MATERIALS
Product Number
Brand
Product Description

Supelco
Melting point standard 121-123°C, analytical standard
Supelco
4-Hydroxybenzoic acid, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Citric acid, Anhydrous, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Benzoic acid, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
L-(+)-Tartaric acid, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
Stearic Acid, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Benzoic acid, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Citric acid, ≥99.5%, FCC, FG
Supelco
Fumaric acid, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Fumaric acid, European Pharmacopoeia (EP) Reference Standard
Supelco
Oleic acid, Selectophore, ≥99%
Stearic acid, European Pharmacopoeia (EP) Reference Standard
Supelco
L-(−)-Malic acid, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
Succinic acid, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Succinic acid, purum p.a., ≥99.0% (T)
Sigma-Aldrich
Succinic acid, puriss. p.a., ACS reagent, ≥99.5% (T)
Sigma-Aldrich
Pyruvic acid, 98%
Sigma-Aldrich
Pyruvic acid, 95%
Sigma-Aldrich
L-(+)-Tartaric acid, puriss., meets analytical specification of Ph. Eur., NF, 99.7-100.5% (calc. to the dried substance), powder
Sigma-Aldrich
Azelaic acid, technical, ~85% (GC)
Sigma-Aldrich
Benzoic acid, meets analytical specification of Ph. Eur., BP, USP, FCC, E210, 99.5-100.5% (alkalimetric)
Sigma-Aldrich
Benzoic acid, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.9% (alkalimetric)
Sigma-Aldrich
Oleic acid, meets analytical specification of Ph, Eur., 65.0-88.0% (GC)
Sigma-Aldrich
Citric acid, BioUltra, anhydrous, ≥99.5% (T)
Supelco
Oleic acid, analytical standard
Sigma-Aldrich
Adipic acid, BioXtra, ≥99.5% (HPLC)
Supelco
Stearic acid, analytical standard
Sigma-Aldrich
L-(−)-Malic acid, ReagentPlus®, ≥99%
Sigma-Aldrich
Suberic acid, purum, ≥98.0% (T)
Supelco
Benzoic acid, reference material for titrimetry, certified by BAM, >99.5%