SLGP05010
Millex™ polyethersulfone inline filter
pore size 0.22 μm, diam. 50 mm, sterile, hydrophilic, 1/4-1/2 in. hose barb
Synonym(s):
0.22 μm PES syringe filter, Express PLUS™ PES in-line filter, Millex-GP in-line filter, Millex™, Millex™ GP50, polyethersulfone syringe filter, sterile pressure filter unit
About This Item
Recommended Products
material
methacrylate-butadiene-styrene (MBS) housing
polyethersulfone membrane
Quality Level
sterility
γ-irradiated
sterile
product line
Millex™
shelf life
3 yr
feature
holdup volume< 1 mL
hydrophilic
manufacturer/tradename
Millex™
parameter
≥350 mL/min water flow rate at 15 psig
3.3 bar max. inlet pressure (50 psi)
45 °C max. temp.
technique(s)
pressure filtration: suitable
sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions)
diam.
50 mm
1 of 4
This Item | SLGPB5010 | SLFGL25BS | SLFG02550 |
|---|---|---|---|
| material methacrylate-butadiene-styrene (MBS) housing, polyethersulfone membrane | material methacrylate-butadiene-styrene (MBS) housing, polyethersulfone membrane | material PTFE membrane, blue PVC housing | material PTFE membrane, polypropylene housing |
| pore size 0.22 μm | pore size 0.22 μm | pore size 0.2 μm | pore size 0.2 μm |
| diam. 50 mm | diam. 50 mm | diam. 25 mm | diam. 25 mm |
| manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ |
| fitting inlet/outlet hose barb (1/4-1/2 in., with Female Luer slip interior) | fitting inlet stepped hose barb (1/4-1/2 in, with Female Luer slip interior), outlet filling bell | fitting female Luer-Lok® inlet, male Luer-Lok® outlet | fitting female Luer-Lok® inlet, male Luer outlet slip |
| sterility γ-irradiated, sterile | sterility γ-irradiated, sterile | sterility ethylene oxide treated, sterile | sterility non-sterile |
General description
Application
Preparation Note
- For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.
- Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing
Other Notes
- For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.
- Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing
Legal Information
Not finding the right product?
Try our Product Selector Tool.
related product
Storage Class
10-13 - German Storage Class 10 to 13
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service
